RF Test Equipment and Accessories

RF Testers

RTX2254 right

Bluetooth Low-Energy RF Tester RTX2254

Bluetooth Low-Energy RF Tester RTX2254 - supports Bluetooth 4.0-5.1 and provides a high-speed, cost-effective way of monitoring quality and performance of BLE devices by allowing users to test key RF parameters on both the PCBA and final assembly level. RF measurements are performed in Direct Test Mode via the tester's embedded HCI interface or as an option also Over-The-Air via the advertising channels i.e. in Advertising mode.

Where to buy, calibration and repair service    Visit our download center    
Watch video

RTX2018 System Overview

Multi-Level Modulation DECT RF Tester RTX2018

MLM (Multi-Level Modulation) DECT RF Tester RTX2018 - performs all key RF measurements on multi-level modulation products using for example the Dialog 14495 MLM DECT chip. The RTX2018 is the third generation of DECT RF testers on the market and supports all frequency bands – European DECT, North American DECT, Japanese DECT, and Korean DECT. The RTX2018 consists of an RTX software application and a Rohde & Schwarz CMW100 (hardware). The RTX2018 allows users to communicate with the DUT (Device Under Test) through UART or USB while performing all the key RF measurements. The comprehensive non-signaling application is well-suited for both R&D and manufacturing.

Where to buy, calibration and repair service    Visit our download center  

RTX2012HS Left (1)

DECT RF Tester RTX2012

DECT RF Tester RTX2012HS - is designed for use in the DECT, DECT 6.0, CAT-iq and Japan DECT bands and supports a wide range of RF tests in connected mode (signaling mode). Due to its high-performance measurement capability, it is ideal for high-throughput manufacturing applications but its extended measurement capabilities also make it a perfect tool for R&D applications.

Where to buy, calibration and repair service    Visit our download center  

RTX2010HS

KDECT RF Tester RTX2010

KDECT RF Tester RTX2010HS - is designed for use in the Korean DECT band and supports a wide range of RF tests in connected mode (signaling mode). Due to its high-performance measurement capability, it is ideal for high-throughput manufacturing applications but its extended measurement capabilities also make it a perfect tool for R&D applications.

Where to buy, calibration and repair service    Visit our download center 

RF Analyzers

RTX2030 DECT AirSpy

DECT Protocol Over-the-Air Analyzer RTX2030 - AirSpy

DECT Protocol OTA Analyzer RTX2030 aka AirSpy - is a very useful generic communication monitoring and analysis tool for DECT, DECT 6.0, CAT-iq and Japan DECT applications. It can assist product developers and installers in performing: protocol analysis, deployment analysis in both single and multi-cell environments, traffic analysis as well as slot and frame timing analysis.

Where to buy, calibration and repair service    Visit our download center   

In-Circuit Emulators

RTX2041

Nexus ICE (In-Circuit Emulator) RTX2041

Nexus ICE (In-Circuit Emulator) RTX2041 - is a universal debugging interface unit which enables development and verification departments to debug a number of core systems such as ARM Cortex Mx and Xtensa quickly and effortlessly.

Where to buy, calibration and repair service    Visit our download center  

Modular RF ATE Units

RTX2300 Power Supply Unit Add-on Instrumenmtation Module.png

Power Supply Unit Add-on Instrumentation Module

Power Supply Unit Add-on Instrumentation Module enhances the test capabilities of the RTX2300 Smart ATE whilst reducing the number of separate stand-alone instruments needed in an ATE solution.

Where to buy, calibration and repair service    Visit our download center

RTX2300 Frequency Counter Add-on Instrumentation Module.png

Frequency Counter Add-on Instrumentation Module

Frequency Counter Add-on Instrumentation Module enhances the test capabilities of the RTX2300 Smart ATE whilst reducing the number of separate stand-alone instruments needed in an ATE solution.

Where to buy, calibration and repair service    Visit our download center

RTX2300 Bluetooth Low-Energy RF Tester Add-on Instrumentation Module.png

Bluetooth Low-Energy RF Tester Add-on Instrumentation Module

Bluetooth Low-Energy RF Tester Add-on Instrumentation Module enhances the test capabilities of the RTX2300 Smart ATE whilst reducing the number of separate stand-alone instruments needed in an ATE solution.

Where to buy, calibration and repair service    Visit our download center

RTX2300 Design Lab Tool Fixture Data Sheet Jan 2018

Design Lab Tool Fixture

Design Lab Tool Fixture is an optional fixture for the RTX2300 Smart ATE unit which gives R&D engineers the ability to test and verify wireless or RF-sensitive designs in a shielded environment.

Where to buy, calibration and repair service    Visit our download center

General terms and EOL Notifications

General Terms of Sales and Delivery

Here you can find our current general terms of sales and delivery. If you have any questions feel free to write us.

RTX General Terms of Sale & Delivery - Version 19102017

 

Product End-Of-Life Notifications

Follow the link to find all our products which have reached End-Of-Life