Wireless PHONEJack Multi-plug interchargeable

The Wireless PHONEJack uses DECT technology from RTX in a special configuration, enabling modem signals to be transmitted at speeds of up to 56 Kbit/s based on the V.34 and V.90 standards.

KEY FEATURES

• Add an analog phone line without new wiring
• Support for Dial-Up modems, fax, phones, VoIP ATA and set-top boxes
• Move your phone line in a second to any place near a socket
• Flexible solution
• Connect further extensions cost effectively and easily

GENERAL FEATURES

• High wireless modem signals: High-speed analogue V.90/V.92 and V34 modem signals with up to 56Kbit/s (minimum of 28.8Kbit/s)
• Scalability: Connection of up to 4 extension units to a single base unit Voice call priority over modem and fax calls – both for parallel telephone, telephone on extension and handset
• Auto conference call: Barge in (auto conference call) between handsets and the external line
• Compatible: The base unit supports GAP handsets. Internal calls support for handset
• Extra extension unit: Registration of extra extension unit by easy cable connection between base and extension unit

SUPPORTED STANDARD

• Interface: 1.8 GHz DECT air interface using DECT authentication and encryption PSTN INTERFACE – EXTENSION UNIT
• Line voltage: 3 intervals from base unit to extension unit
  - No line: <3V
  - Parallel telephone off hook: 3V < voltage < 18V
  - Idle line: > 25V
• Ringer signal: 25Hz ringer signal on extension unit
• Extension unit ringer signal (square wave) with >=50VRMS

PSTN INTERFACE – BASE UNIT

• Line interface: European TBR 37/38 with DTMF and optional pulse dialing supported REN: < 0.1REN load from base on telephone line

CLI SUPPORT

• Standard: Bellcore 202, V.23 (EU)
  Signal modes:
  - FSK DT-AS reception and generation
  - FSK RP-AS reception and generation
  - DTMF reception and generation in extension unit without pol-reversal
  Signal content:
  - Calling line identity (EN 300 659-3)
  - Calling party name (EN 300 659-3)
   

CONNECTORS

• Base station: Two RJ11 plugs on base for connection to PSTN line and plug through to other PSTN services
• Extension unit: One RJ11 plug for attachment to modem, fax or telephone

MECHANICS

• Dimensions size: 75(W) x 60(D) x 95(H) mm
• Weight: <100g
• Operating temperature: 10° – 40°C (for indoor use only)
• LED signaling: MMI - 1 color (green)
• LED on base and 3 color (yellow, green

POWERS

• Power supply: 230V +/- 10%
• Power consumption:
  - Idle mode: <1W.
  - Active mode: <3.1W.
  - Active mode ringing: <3.1W.

APPROVALS

• Safety:
  - IEC 60695-2-11 (Glow Wire)
  - IEC 60950 (CE)
• DECT:
  - TBR 10
  - TBR 37
  - TBR 38
  - TBR 6
  - EN 300 444 – GAP
• EMC:
  - EN55022
  - IEC 61000-4 and 64000-3
  - IEC 1000-4 (over voltage and current)
• Environmental:
  - RoHS and WEEE.
  - IEC 60068